Privacy Policy

Last updated: November 11, 2026

This page explains what information GetMyLocations receives when you use the site, what we do with it, and which third parties are involved. The summary at the top covers the common questions; the sections below give the details for anyone who wants them.

Short summary

  • The GPS coordinate the site reads from your browser stays in your browser.
  • Only the coordinate itself is sent to a third-party service so we can show a city name. No identifier we control travels with it.
  • We use Google Analytics to count visits and see which pages are used. We do not have an account system.
  • The host (Cloudflare) keeps short-lived request logs the way any web host does.
  • Banner ads are served by Adsterra, and by Google AdSense once it is enabled. Each sets its own advertising cookies. You can opt out of personalization at any time.

1. What we read from your browser

When you click any location button on the site, the browser asks the operating system for your position and returns a latitude and longitude to the page. That coordinate is held in memory in the open tab. We do not write it to a database we own, and there is no account to attach it to. Closing the tab discards it.

Some tools also call navigator.geolocation.watchPosition, which subscribes to updates as you move. The same rule applies: the updates are kept in the tab until you close it or stop watching.

2. Reverse geocoding — what the third party sees

A coordinate on its own is just numbers. To show a readable street address, city and country, the page sends the coordinate to a reverse-geocoding service. We use:

  • BigDataCloud — the first choice for the city and country on the homepage tool. Their privacy policy is published at bigdatacloud.com/privacy-and-cookie-policy.
  • OpenStreetMap Nominatim — used for the nearest street address on the homepage and My Location, by the Address Finder, by the Street View tool to turn a typed address into coordinates, by What’s My Postcode for the nearest address and for postcodes outside the UK, by the Photo Location Finder for the address of a photo’s coordinates (the photo itself is never uploaded; it is read in your browser), for the place names on the Antipode Map, for place searches on the Earthquakes, Sunrise and Sunset, UK Crime Map, Elevation, Area Calculator, Time Difference and Moon Phase tools, and as a fallback elsewhere. Their privacy policy is published at wiki.osmfoundation.org/wiki/Privacy_Policy.
  • postcodes.io — used by What’s My Postcode to find the UK postcode nearest a coordinate, or the details of a postcode you type. It is a free, open-source service maintained by Ideal Postcodes on Office for National Statistics data (source code at github.com/ideal-postcodes/postcodes.io). It does not publish a separate privacy policy; the request carries only the coordinate or postcode and your IP, as above.
  • U.S. Census Bureau geocoder — used by What’s My ZIP Code to find the county, city, districts, and Census ZIP area for a coordinate in the United States. The page loads the answer as a small script from geocoding.geo.census.gov, which receives the coordinate and your IP. The Census Bureau’s privacy policy is at census.gov/about/policies/privacy.html.
  • QLever (University of Freiburg) and the OpenStreetMap Overpass API — used by Pharmacy Near Me, Public Toilets Near Me and EV Charging Near Me to find places nearby. Your browser rounds the position to a grid of about 2 km (pharmacies and chargers) or 1 km (toilets) and sends only that rounded point to our own server, which asks QLever’s OpenStreetMap index (or an Overpass server when QLever does not answer) and keeps the answer for up to a week. These services see our server, not your IP. Distances are worked out in your browser.
  • data.police.uk — used by the UK Crime Map. Your browser sends the position, rounded to about 100 m, and the month to the Home Office’s police data API, which returns the crimes recorded within a mile; when there are none it also asks which police force covers that point. Its terms are at data.police.uk/about.
  • USGS and GeoNet — used by Earthquakes Near Me. Your browser sends the position, rounded to about 1 km, with the search radius and period to the US Geological Survey’s earthquake catalogue. In New Zealand it also loads GeoNet’s list of the latest quakes, a general feed that receives no coordinate.
  • Environment Agency — used by Flood Warnings Near Me. Your browser sends the position, rounded to about 100 m, to the Environment Agency’s real-time flood-monitoring API to get the warnings and river gauges nearby.
  • Our weather, sea temperature and air quality relays — Weather Near Me and the UV index on Air Quality Near Me send the position, rounded to about 1 km, to our own server, which asks MET Norway (the Norwegian Meteorological Institute) for the forecast. Sea Temperature sends the rounded position to our server, which asks NOAA CoastWatch for satellite sea temperatures. Air Quality Near Me sends the rounded position to our server, which asks OpenAQ for nearby monitoring stations. Our server caches the answers for 30 minutes to 6 hours; these services see our server, not your IP.
  • AWS Terrain Tiles — used by the Elevation Finder. Your browser loads the elevation map images covering the points you choose from Amazon Web Services’ open data bucket, which sees the tile requested and your IP.
  • NOAA Space Weather Prediction Center — used by the Northern Lights Forecast. Your browser downloads the global aurora and Kp forecasts, general files that contain no location; your chance of aurora is worked out in your browser.
  • CelesTrak — used by the ISS Tracker, through our server, which fetches the current orbital elements every two hours. Positions and pass times over your location are worked out in your browser; your location is not sent anywhere.
  • OSRM route planner — used by the Trip Fuel Cost Calculator. After the place names you type are found with Nominatim, your browser sends the two points to the OSRM demo server (router.project-osrm.org) for the road distance.
  • ExchangeRate-API — used by the Currency Converter. Your browser downloads the day’s exchange rate table from open.er-api.com; no amount or currency choice is sent.
  • Nager.Date — used by Public Holidays. Your browser asks date.nager.at for the holidays of the country and year you choose; no location is sent.
  • FCC Area API — a backup for the county and state on What’s My ZIP Code when the Census service does not answer. It receives the coordinate and your IP. The FCC’s privacy policy is at fcc.gov/general/privacy-policy.

Each request contains the coordinate and your IP (visible to any web service you connect to). It does not contain a username, an email, or any identifier we attach. Where a service publishes a privacy or retention policy, it is linked above.

3. Map tiles

The maps you see are rendered with Leaflet and use tile images from OpenStreetMap, plus Esri (ArcGIS) imagery on the Satellite View tool and when you switch the Interactive Map to satellite view. Loading a tile reveals your IP and the tile coordinate to those providers, the same as any embedded map would. The Satellite View tool also asks Esri for the capture date of the photo at the centre of the map, which sends Esri that point’s coordinates. Their privacy policies are published at wiki.osmfoundation.org/wiki/Privacy_Policy and esri.com/en-us/privacy.

The Driving Directions tool embeds a Google Maps route, and the Street View tool opens Google Street View (or embeds it on the page when enabled). Those embeds and links are served by Google, which receives your IP and the place or route shown, under the Google Privacy Policy at policies.google.com/privacy.

4. IP lookups and the network, web and everyday tools

The IP Location tool calls the public freeipapi.com endpoint (privacy policy at freeipapi.com/privacy). The IP you look up — your own when you click Lookup my IP, or any IP you paste — is sent to freeipapi.com, which returns the geolocation data. Their policy covers what they keep.

On the My Location page, the rough location shown before you press the button is Cloudflare’s own estimate for your IP address, which this site’s server reads from the request and returns to your browser. It is not sent to any other service and is not stored.

On the homepage, if no exact location is available (you declined the prompt, it failed, or you have not answered yet), you can click Show my approximate area. Only then is your IP address sent to BigDataCloud (listed above) to estimate your city. Nothing is looked up unless you click.

If you type a domain name (such as example.com) into the IP Location tool, your browser first asks Cloudflare’s public DNS resolver (cloudflare-dns.com, the 1.1.1.1 service) for the domain’s IP address, then looks that IP up at freeipapi.com. Cloudflare receives the domain name and your IP address as part of that DNS request; see 1.1.1.1/privacy. Private and reserved addresses (such as 192.168.x.x) are recognised in your browser and are not sent to either service. The optional “Measure the gap” check reads your device location in the browser and only compares it with the lookup result there; that reading is not sent anywhere.

The network, web and everyday tools send only what you type to the service that answers it, directly from your browser: DNS questions to Cloudflare’s and Google’s public resolvers (and, for the blacklist and ASN checks, to the blocklists and Team Cymru through DNS); IP, ASN and domain registration lookups to the regional internet registries through rdap.org, and announced IP blocks to RIPEstat; certificate searches to SSLMate’s Cert Spotter; and the speed test to Cloudflare’s speed-test servers. Each of these sees your IP address as part of the request. Tools that read a web page (View Page Source, Open Graph Checker, Link Analyzer and Website Server Checker) ask our own server to fetch that page once; the address you enter passes through Cloudflare’s request logs like any other request, and we keep no copy of the page. The password, hash, random word, binary and unit tools, the email header analyzer, the IPv4 to IPv6 converter and the MAC lookup work entirely in your browser; what you type there is not sent anywhere.

5. Hosting and request logs

The site is hosted on Cloudflare. Like every web host, Cloudflare keeps short request logs (IP address, user agent, URL requested, timestamp) so that abuse and outages can be diagnosed. We do not pull those logs into a separate analytics tool. Cloudflare’s privacy policy is published at cloudflare.com/privacypolicy.

6. Analytics — Google Analytics

We use Google Analytics 4 to understand how many people visit, which pages and tools they use, and roughly where they come from (country and city level). Google Analytics sets first-party cookies (such as _ga) and receives your IP address, which Google Analytics 4 does not log or store. We see only totals, not individual visitors, and we do not link analytics to your GPS coordinates. You can opt out with Google’s browser add-on at tools.google.com/dlpage/gaoptout.

To learn which tools work, we also send Google Analytics short events such as “a location was found”, “location permission was denied”, “a lookup was run” or “a result was copied”, with the page they happened on. These events never contain what you typed or what a tool found: no coordinates, addresses, IP addresses, email addresses or domain names.

In the European Economic Area, the United Kingdom and Switzerland, Google Analytics starts without cookies (Google Consent Mode) and only sets them if you accept measurement in the consent banner; until then it sends Google only basic page signals without setting or reading any cookie.

7. Advertising — Adsterra and Google AdSense

Once Google AdSense is enabled on the site, Google and its advertising partners may set cookies (for example __gads, __gpi, and NID) to serve advertisements, prevent fraud, and — where you have consented — personalize them. You can review and change your ad personalization settings at adssettings.google.com or opt out of personalized advertising network-wide at aboutads.info/choices.

For visitors in the European Economic Area, the United Kingdom, and Switzerland, the AdSense Consent Management Platform shows a consent dialog the first time you visit, in line with GDPR and ePrivacy rules.

The banner and native ads marked “Sponsored” are served by Adsterra. The site shows banners only: no pop-under, push or full-screen ads. Adsterra and its advertisers may set cookies and receive your IP address, device and browser details, and the page you are viewing, to choose and measure ads and to prevent fraud. Adsterra’s privacy policy is published at adsterra.com.

Until October 2026 the site also used Monetag and, briefly, Adcash. If you allowed notifications from this site while Monetag was used, the notification service worker now removes itself the next time you visit; you can also turn notifications off at any time in your browser’s site settings.

8. What we do not do

  • We do not use analytics to identify you or to build an advertising profile of you.
  • We do not sell or rent data to anyone.
  • We do not have user accounts, so there is no profile to compromise.
  • We do not store your GPS coordinates on a server we own.

9. Children

The site is a general-audience utility and is not directed at children under 13. If you believe a child has provided personal information through the site, contact us at ahmed@getmylocations.com and we will respond promptly.

10. Your rights

Under GDPR, CCPA, and similar laws, you have rights to access, correct, or delete personal data held about you. Because we do not store personal data on our own servers, requests are best directed to the third-party services listed above. You can revoke browser location permission at any time through your browser’s site settings.

11. Changes to this policy

We update this page when the services we use change. The date at the top reflects the most recent revision. Material changes will be noted briefly at the top of the page for a reasonable period.

12. Contact

Questions about anything on this page can go to ahmed@getmylocations.com. See the Contact page for response-time expectations.